Poweramp VS SERIES HYDRAULIC - Manual (Page 32)

30 4111-0008 — Sept 2012
Troubleshooting
• Check all fuses inside the control panel(s). Replace
any blown fuse(s) with a fuse of equal specification.
• Make sure the correct voltages are present at the
proper locations inside the control panel(s).
Before performing the detailed troubleshooting procedures, check the following items first:
TROUBLESHOOTING
When service under the dock leveler is required,
always lock all electrical disconnects in the OFF
position after raising the platform and engaging the
maintenance prop. Failure to do this may result in
serious personal injury or death.
Always post safety warnings and barricade the
work area at dock level and ground level to prevent
unauthorized use of the dock leveler before
maintenance is complete. Failure to do this may
result in serious personal injury or death.
1.50"
3.
00"
Control Box Size: Overlay
Decal Size: 1.5 x 3
File Name: 1751-0736
DANGER
Hazardous Voltage
Will Cause Severe
Injury or Death
Arc Flash and
Shock Hazard
PPE (Personal Protection
Equipment) Required
De-energize equipment before
working on or inside. Do not
open cover without appropriate
PPE. Refer to NFPA 70E for
PPE requirements. This panel
may contain more than one
power source.