PROLiNK PPS2104N User Manual - Manual (Page 15)

EN 12
4.4. Installation of USB Device Driver
Some USB devices, like printers or MFPs (multifunction printers), require to install vendor-supplied driver
(usually on CDROM). For those USB devices that do not need to install driver, please skip this section.
a) Insert the CDROM into the CD drive and run the “autorun” program.
b) Follow the instructions of the installation program to install driver.
c) When the installation program asks you to plug-in the USB device, run the “ShareHub Device Servers
Control Center”.
d) In the ShareHub Device Servers Control Center, click the ShareHub Device Servers that has the desired
USB device attached.
e) Click the desired USB device as the following figure.
f) Click the “Connect” button. Then the message “Manually Connect by your_computer_name” will be shown,
as the following figure.
g) Now, the installation program will detect the USB device and continue to install driver.
h) After the installation is completed, click the USB device in the ShareHub Device Servers Control Center and
then click the “Disconnect” button to disconnect the USB device.
Now the driver of your USB device is installed.