PROLiNK PPS2104N User Manual - Manual (Page 16)

EN 13
4.5. Using the ShareHub Device Servers
a) In the ShareHub Device Servers Control Center, click the ShareHub Device Servers that has the desired
USB device attached.
b) Click the desired USB device.
c) Click the “Connect” button. Then the message “Manually Connect by your_computer_name” will be shown.
d) Now, PC will detect the plug-in of the USB device. The “connect” operation is a software operation that
simulates an actual USB device plug-in. That is to say, when you do a “connect” operation in the ShareHub
Device Servers Control Center, PC can then detect a USB device’s plug-in, although actually you do not
plug in any USB device.
e) Then, just use the USB device as if it is connected directly to your PC’s USB port.