PROLiNK PPS2104N User Manual - Manual (Page 27)

EN 24
6.2.2. Setting up Server Configuration
To set up the Server configuration, click on the “CONFIG” icon ad then the system will request user to
enter administrator (default: admin) and password (default: admin) to login.
 General Configuration
o
Server Information: You have to set the Server Name, which is the name to represent the
Server.
o Storage Access Mode: You may set the Server as Server Mode or NetUSB Mode.
o
TCP/IP: You have to set the Server’s TCP/IP configuration to connect TCP/IP network.
Please see Chapter 3 Basic Installation for more details.
o
UPnP Setting: Enable or disable the UPnP function.
o File Server Codepage: Set file server code to the language which you need.
 Administrator: You can change administrator name and password. If you forgot administrator
name and password, you must perform Restore Factory Default action by plugging in the power
adaptor while pressing the Init button. Please refer to the chapter “Restore Factory Defaults”.