PROLiNK PPS2104N User Manual - Manual (Page 21)

EN 18
4.8. USB Storage
You must use “manually connect” for USB storage. After you connect a USB storage, like the following picture,
your PC will have a new disk. If the USB storage is a flash drive, the new disk is a “removable disk”.
You can see the storage icon in the system tray.
Then just use the new disk as a general disk. After you finish the disk operations, click the storage icon in the
system tray and choose “Safely Remove Hardware and Eject Media” to Eject USB Mass Storage Device, as the
following figure.
Then, in the ShareHub Device Servers Control Center, click the USB storage device and click the “Disconnect”
button to disconnect the USB storage device.