Actiontec electronic Actiontec Wireless DSL Gateway GT701WG - Manual (Page 103)

100
Actiontec 54 Mbps Wireless DSL Gateway User Manual
101
Appendix B Setting Up Static IP on the Computer
7. The “Local Area Connection Properties” window appears. Click General.
8. In the “Components checked are used by this connection” list box, double-
click Internet Protocol ( TCP/IP ).
9. The “Internet Protocol ( TCP/IP ) Properties” window appears.
10. In the General tab, make sure the circle next to “Use the following IP Address
” is selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
11. Enter the following address in the “ IP Address” text box:
192.168.0.2
Enter the periods in the address by pressing the space bar on the keyboard.