Lan ip address, Dhcp server, 49 dhcp server – Actiontec electronic Actiontec Wireless DSL Gateway GT701WG User Manual
Page 52
48
Actiontec 54 Mbps Wireless DSL Gateway User Manual
49
Chapter 4 Using Advanced Setup
LAN IP Address
Selecting LAN IP Address in the “Advanced Configuration” screen generates the
“
LAN IP
Address” screen.
The values in the “Device
IP
Address” and “Device
LAN
Netmask” text boxes are
the
IP
address and Subnet mask of the Gateway as seen on the network. These val-
ues can be modified for your
LAN
network, but Actiontec recommends keeping the
default factory settings (
IP
Address
192.168.0.1
Subnet mask
255.255.255.0
).
☞
Note: If the Gateway’s
LAN IP
Address is modified, ensure the
DHCP
Server range is within the same subnet. For more infor-
mation, see “
DHCP
Server Configuration.”
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
DHCP Server
Selecting
DHCP
Server in the “Advanced Configuration” screen generates
the “
DHCP
Server” screen. The Gateway has a built-in
DHCP
(Dynamic Host
Configuration Protocol) server that automatically assigns a different
IP
address to
each computer on the network, eliminating
IP
address conflicts.
The factory default setting is On. To disable the
DHCP
Server, select Off.