Actiontec electronic Actiontec Wireless DSL Gateway GT701WG - Manual (Page 68)

64
Actiontec 54 Mbps Wireless DSL Gateway User Manual
65
Chapter 6 Using Utilities
N
Warning: Do not unplug the power cord from the Gateway
during the Restore Default Settings process. Doing so may result
in permanent damage to the Gateway.
When the Power Light stops flashing and glows steadily green, the Gateway is fully
operational, and the default settings have been restored.
Upgrade Firmware
Selecting Upgrade Firmware in the “Utilities” screen generates the “Upgrade
Firmware” screen. Actiontec periodically posts firmware upgrades to enhance
the capabilities and boost the performance of the Gateway. Follow the on-screen
instructions to upgrade the Gateway’s firmware.