Actiontec electronic Actiontec Wireless DSL Gateway GT701WG - Manual (Page 48)

44
Actiontec 54 Mbps Wireless DSL Gateway User Manual
45
Chapter 4 Using Advanced Setup
Security
There are four wireless security options: Off, WEP , WEP+802.1 x, and WPA . The lat-
ter three options are different types of wireless security.
Off
Selecting Off disables wireless security. Selecting this option allows any computer
with wireless capability and the correct
ESSID value to join the wireless network.
WEP
Selecting the security option “
WEP ” and clicking Next in the Wireless Settings
screen generates the “ WEP Key” screen. Here, the authentication type, encryp-
tion level, and WEP keys are entered to activate WEP (Wired Equivalent Privacy)
security encryption for the wireless network.
Authentication Type - There are three authentication types: Open, Shared, and
Both. Open authentication allows any wireless-enabled device to recognize the
Gateway, if the correct
WEP key is enabled on the device. Shared allows only
wireless-enabled devices with the correct WEP key and Shared key to recognize
the Gateway. Selecting Both enables both Open and Shared authentication types.
64-bit WEP - 64 -bit WEP requires four separate keys. Each key comprises five hexa-
decimal digit pairs. A hexadecimal digit consists of an alphanumeric character
ranging from
0-9 or A-F . An example of a 64 -bit WEP key is: 4E-A3-3D-68-72 . To
create a set of 64 -bit WEP keys, activate all four keys by clicking in the appropri-
ate circles, then enter five hexadecimal digit pairs in each Key text box (Key 1-,
Key 2-, Key 3-, Key 4-). After activating
64 -bit WEP on the Gateway, a computer
with wireless capability can join the network only if these same keys are entered
in the computer’s wireless encryption scheme.