Actiontec electronic Actiontec Wireless DSL Gateway GT701WG - Manual (Page 55)

52
Actiontec 54 Mbps Wireless DSL Gateway User Manual
53
Chapter 4 Using Advanced Setup
4. To remove blocked services, select the computer’s IP address in the “Blocked IP
Address List” text box and click Remove.
Netmeeting
If a computer on the network uses Netmeeting, enable Netmeeting, by clicking the
circle next to “On” and entering the IP address of the computer. Click Next, then
click Save and Restart to apply the settings. If Netmeeting is not needed, click the
circle next to “Off.”
☞
Note: Netmeeting is used for NAT /Private IP addressing only. If
the computer is configured for Unnumbered Mode and has a
Public
IP Address, Netmeeting does not have to be enabled.
Website Blocking
Selecting Website Blocking in the “Advanced Configuration” screen generates the
“Website Blocking” screen. This feature enables the Gateway to block Web sites
to all computers on the network. To block a Web site, enter the address of the
Web site in the “Website” text box and click Add. The blocked Web site address is
displayed in the “Blocked Website List” text box, and will not be available to com-
puters on the network. To remove a blocked Web site, click on it in the “Blocked
Website List,” then click Remove. Website Blocking supports blocking up to
50
Web sites.