Port forwarding – Actiontec electronic Actiontec Wireless DSL Gateway GT701WG User Manual
Page 57
54
Actiontec 54 Mbps Wireless DSL Gateway User Manual
55
Chapter 4 Using Advanced Setup
Port Forwarding
Selecting Port Forwarding in the “Advanced Configuration” screen generates the
“Port Forwarding” screen. Port forwarding allows certain programs to bypass the
Gateway’s built-in firewall, allowing access to parts of the network (for hosting a
Web or
FTP
server, for example). To use port forwarding, enter the
IP
port range in
the “
IP
Port Range” text boxes. (If more than
10
ports are needed, Actiontec recom-
mends using
DMZ
Hosting. See “
DMZ
Hosting,” below, for more information.)
Choose the protocol type from the “Protocol” list box, then enter the
IP
address of
the computer on the network to be used as a host. Click Add. The forwarded ports
appear in the “List of Forwarded Ports” text box.
To remove forwarded ports, highlight them, then click Remove.
Clicking Advanced brings up the “Advanced Port Forwarding” screen.