Actiontec electronic Actiontec Wireless DSL Gateway GT701WG User Manual
Page 125
122
Actiontec 54 Mbps Wireless DSL Gateway User Manual
123
Appendix G Non-Windows Setup
2. When the “
TCP/IP
” window appears, select Edit from menu bar, then select
User Mode.
3. When the “User Mode” window appears, select Advanced, then click
OK
.
4. In the “
TCP/IP
” window, select Ethernet from the “Connect via” drop-down
list.
5. Select Using
DHCP
Server from the “Configure” drop-down list.
6. Ensure the “Use
802.3
” option is not checked.
7. Disregard any addresses in the
IP
Address text boxes. They will be reacquired
when the first connection is made.
8. Click Options and when the “
TCP/IP
Options” window appears, select Active.
Ensure the “Load only when needed” option is not checked, then click
OK
.
9. Close the “
TCP/IP
” window and when prompted to save changes, click Save.
10. Restart the computer. The
TCP/IP
settings are configured.
To finish setting up the computer to connect with the Gateway, follow the instruc-
tions in chapter 3, “Performing a Basic Setup,” on page 33.