E-Mon E-PS-S-HV-RTU - Manual (Page 25)

Chapter 3 Communication 19
U S B C o m m u n i c a t i o n p o r t ( U S B – o n b o a r d )
The PowerSmart Socket PQM provides a standard full speed USB DEVICE port.
The USB DEVICE port connection is provided by the LOGIC/DISPLAY cable terminated with
a standard USB type A connector as shown in figure 23
F i g u r e 2 3 : U S B c o n n e c t i o n
O p ti on al C o m mu n ic a ti on p or t s
W i r e l e s s C o m m u n i c a t i o n p o r t – G S M / G P R S m o d u l e ( C O M 2 –
o p t i o n a l m o d u l e )
The Wireless Communication port – COM2 is provided by optional module: GSM/GPRS
module.
Before plugging-in the GSM/GPRS module to the meter, insert the SIM card into the SIM
card carrier, then pull the slide to lock the SIM card as shown in figure 24.
1) Push down the SIM carrier slide
2) Insert the SIM card into SIM carrier
3) Push up the SIM carrier slide to lock the SIM card
F i g u r e 2 4 : G S M / G P R S m o d u l e – S I M c a r d a s s e m b l y
To install the GSM/GPRS module follow instructions:
1) Remove the plastic cover
2) Remove the body shield