Fairbanks FB3000 II Operators Manual - Manual (Page 17)

Section 3: Key Functions and Menus
02/10 17 51220 Rev. 1
3.3. BACKING UP AND SAVING PROGRAM
CHANGES TO A FOLDER
Each time a programming change is made to the Kernel
Program, a
Backup Changes popup window
appears.
─ The normal answer is NO .
─ Either double-click the or click the .
NOTE:
Save changes ONLY WHEN the programming change(s) are correct, and
the system is proven to operate properly for all conditions.
─ For backing up the changes to a folder, click either the
or on the Weight Screen’s keypad, click the .
─ Each file is saved by the date.
─ ( yyyymmdd.BAK ).
IMPORTANT NOTE:
Backup
EVERY
Configuration change… EVERY TIME!