Fairbanks FB3000 II Operators Manual - Manual (Page 19)

Section 4: Input/Output (I/O)
02/10 19 51220 Rev. 1
4.2.4. Load Default Data Protocols
When programming a Output Data String, the Fairbanks’ FB3000 II has five of the
most commonly used pre-configurations, known as
Load Defaults . These data
strings are listed below:
Fairbanks
<STX><A><B><C><GGGGGG><TTTTTT><CR>
Toledo
<STX><A><B><C><GGGGGG><TTTTTT><CR>
Cardinal
<CR><P><WWWWWW><m><SP><U><SP><g><SP><SP><ETX>
Weightronix
< ><M><WWWWWW>< ><U><CR><LF>
Condec
<STX><P><WWWWWWW><U><G><M><CR>
4.2.5. Load the Default COM Settings
Follow these steps to configure the Load Default into the Output Data String.
3. From the Weighing Application
Window, press the MENU button,
from the Kernel Options Menu, select
Configuration Menu .
4. Select Configure Output. .