Fairbanks FB3000 II Operators Manual - Manual (Page 32)

Section 4: Input/Output (I/O)
02/10 32 51220 Rev. 1
4.3. 20mA Serial Current Loop Programming, Continued
3. Set the Remote Display to COM 1.
4. Configure the Baud , Parity , Data Bits , and Stop Bits required.
5. Reset the Remote Display back to OFF.
6. Select the Enable 20ma Output check option.
7. Select ACTIVE in the Scale dropdown window.
8. Select Continuous in the
correct drop-down window.
1