Appendix iii: data output, Remote display output, Configure output – Fairbanks FB3000 II Operators Manual User Manual
Page 52
02/10
52
51220 Rev. 1
Appendix III: Data Output
REMOTE DISPLAY OUTPUT
Data Format
<STX><4><0><SP/-><XXXXXX><ETX>
Note(s):
1. Characters denoted by
X
are
characters 0-9.
2. Leading zeroes are suppressed.
3. Polarity indication for a positive value is a space (
SP
).
− Negative values are not transmitted.
4.
Identifier code <4><0> = Gross weight
.
− Transmission is Gross Only.
5. Transmission for the
DEMAND Mode occurs when a carriage return
(CR) Hex
0D
is received.
CONFIGURE OUTPUT
Fairbanks Data Format
<STX><A><B><C><GGGGGG><TTTTTT><CR>
Note(s):
1. Characters denoted by
G
and
T
are
characters 0-9.
2. Leading zeroes are suppressed.
3. Gross Weight Data =
G
Tare Weight Data =
T
Status Code (Word) A
Bit #
X00
X0
X
X.X X.XX X.XXX
X.XXXX X.XXXXX
0
0
1 0 1 0 1 0 1
1
0
0 1 1 0 0 1 1
2
0
0 0 0 1 1 1 1