Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 31)

OPERATOR’S MANUAL page 31
4. If the library contains a description starting with this character, the
description is shown in the Description-field. Press the up arrow to
view more descriptions starting with the same character.
5. Press 0 to exit search mode.
4.1.2 Special Characters
The keypad also holds special characters similar to the mobile phone.
Punctuation, commas, explanation mark etc are found by pressing digit 1,
other characters are found by pressing the other digits 2-9 repeatedly. The
digit 0 does not hold any special characters.
4.1.3 Enter Job Details from the Job List
Press job record/F3 to enter the job list from the automatic weighing mode.
By default, the active job record is visible on the screen. Press the job record
number directly using the keypad, or use the arrows to specify a desired job
number.
Figure 4-1 Search for customer.
Letter visible in
search mode
Index-field
Text-field