Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 39)

OPERATOR’S MANUAL page 39
- Press F3 to clear the last letter.
- Press F4 to clear all letters.
5. Press Save/# to store the description with the identification number in
the library.
6. Press Exit/* to return to the Text Editing menu.
4.2 Reports
LOADTRONIC 3 keeps track of the latest 30000 jobs. The oldest jobs will
be overwritten by the latest jobs as the number of jobs pasts 30000; refer
chapter 5.2 for backup of the loadlist. You can ask for a report for jobs that
has been performed in a specific time period. You can build up the report to
provide a single value of the total weight loaded, the total weight delivered
to a specific customer, the total load of a specific material delivered to a
specific customer etc, or simply to make a copy of a single job. Refer
chapters 4.2.2, 4.2.3 and 4.2.4 for description of how to specify your report.
4.2.1 Report Header
The report header, e.g. your company details, is added from the Text Editing
menu; open Main Menu - Text Editing - Report Header, refer chapter 2.1.
5 lines can be edited, refer Figure 4-8; the text in the first line will show in
the lower left corner of the display.
Highlight a line, press Edit/F2 to enter text editing. Type your text using the
keypad.
- Press F2 to toggle between capital and small letters.
- Press F3 to clear the last letter.
- Press F4 to clear all letters.
Press Save/# to store the text.