Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 38)

page 38
- Press F2 to toggle between capital and small letters.
- Press F3 to clear the last letter.
- Press F4 to clear all letters.
5. Set the material Density, refer Figure 4-7:
- Press Next/F4 to highlight the Density-field.
- Press Edit/F2 to edit the value.
- Type the weight using the keypad or adjust the weight in steps using
the arrows. Press Exit/* to clear the field.
6. Press Save/# to store the description with the identification number in
the library.
7. Press Exit/* to return to the Text Editing menu.
Edit the Attachment:
1. Open Main Menu - Text Editing – Attachment, refer chapter 2.1.
2. Type the Attachment ID number directly using the keypad, or set the
number by pressing the arrows repeatedly.
3. Press Next/F4 to highlight the text field.
4. Press Edit/F2 to edit the text description. Use the keypad to type the
description.
- Press F2 to toggle between capital and small letters.
Figure 4-7 Edit the material description and density.
Fairbanks Scales