Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 37)

OPERATOR’S MANUAL page 37
Edit Location:
1. Open Main Menu - Text Editing – Location, refer chapter 2.1.
2. Type the Location ID number directly using the keypad, or set the
number by pressing the arrows repeatedly.
3. Press Next/F4 to highlight the text field.
4. Press Edit/F2 to edit the text description. Use the keypad to type the
description.
- Press F2 to toggle between capital and small letters.
- Press F3 to clear the last letter.
- Press F4 to clear all letters.
5. Press Save/# to store the description with the identification number in
the library.
6. Press Exit/* to return to the Text Editing menu.
Edit the Material:
1. Open Main Menu - Text Editing – Materials, refer chapter 2.1.
2. Type the Material ID number directly using the keypad or set the
number by pressing the arrows repeatedly.
3. Press Next/F4 to highlight the text field.
4. Press Edit/F2 to edit the text description. Use the keypad to type the
description.
Figure 4-6 Edit the trucks description and PayLoad.