Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 36)

page 36
Edit the Truck:
1. Open Main Menu - Text Editing – Truck, refer chapter 2.1.
2. Type the Truck ID number directly using the keypad, or set the number
by pressing the arrows repeatedly.
3. Press Next/F4 to highlight the text field.
4. Press Edit/F2 to edit the text description. Use the keypad to type the
description.
- Press F2 to toggle between capital and small letters.
- Press F3 to clear the last letter.
- Press F4 to clear all letters.
5. Set the PayLoad, refer Figure 4-6:
- Press Next/F4 to highlight the PayLoad-field.
- Press Edit/F2 to edit the value.
- Type the weight using the keypad or adjust the weight in steps using
the arrows. Press Exit/* to clear the field.
6. Press Save/# to store the description with the identification number in
the library.
7. Press Exit/* to return to the Text Editing menu.
Figure 4-5 Type the customer description.
Fairbanks Scales