Fairbanks VSX SERIES TRUCK SCALE - Manual (Page 10)

Section 1: General Information
04/12 10 51173 Rev. 8
PHASES OF INSTALLATION
The complete installation consists of the following phases:
A. Pre-Installation Checklist
B. Unpacking
C. Equipment location
D. Safety
E. User Responsibility
F. Installation
G. Calibration
Pre-Installation Checklist
The following points should be checked and discussed with the Area Sales Manager
and/or customer, if necessary, before the technician goes to the site and installs the
equipment.

Check the customer's application to make certain it is within the capabilities and
design parameters of the equipment.

If the installation process might disrupt normal business
operations, tell the customer and ask that they make ample
arrangements.

Is properly-grounded power available at the installation
location?

Be sure that the equipment operator(s) are available for
training.

The Service Technician must thoroughly review the installation procedures.

The service technician reviews the recommended setup with the Area Sales
Manager or Area Service Manager, and together they identify all necessary
variations to satisfy the customer's particular application.
Unpacking
Follow these guidelines when unpacking all equipment:

Check in all components and accessories according to the customer's order.