Fairbanks VSX SERIES TRUCK SCALE - Manual (Page 12)

Section 1: General Information
04/12 12 51173 Rev. 8
Safety
Follow these safety precautions during operation:

Do not load the platform if there is any evidence of
damage to the platform or supporting structure.
Use safety chains or other suitable restraining devices if
there is any possibility of the load shifting, falling, or rolling
from its position on the platform.
Users’ Responsibilities

All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the installation.
 They are included in the installation charge.
 Only those charges which are incurred as a result of the equipment's inability
to be adjusted or calibrated to performance specifications may be charged to
warranty.

Absolutely no physical, electrical or program modifications other than selection of
standard options and accessories are to be made to this equipment.
 Electrical connections other than those specified may not be performed, and
physical alterations (holes, etc.) are not allowed.

The equipment consists of printed circuit assemblies which must be handled
using ESD handling procedures, and must be replaced as units.
 Replacement of individual components is not allowed.
 The assemblies must be properly packaged in ESD protective material and
returned intact for replacement credit
per normal procedures.
