Fairbanks Trident Precast Concrete Deck Truck Scale - Manual (Page 18)

Section 3: Scale Installation
04/11 18 51255 Rev. 2
G. Connecting the Modules:
For undermount model:
a. Bolt the modules together using the 1-⅛" x 7" full-thread rod, lock
washer, flat washers and nut provided. Remember to shim the supporting
blocks if necessary to align modules. Snug nuts, but do not fully tighten
them yet. (See Figure 51255-5.)
For cover plate model:
c. Bolt the modules’ channels together using the ½” x 4” x 6” spacers and
1” x 3” bolts. Insert the ½” x 4” x 6” spacer plates between the channels.
The bolts go through the back-to-back channels and the spacer. Snug the
bolts but do not tighten them yet. (See Figure 51255-6.)
Undermount model panel connection detail 51255-5
Cover plate model panel connection detail 51255-6
1 1/8”