Fairbanks Trident Precast Concrete Deck Truck Scale - Manual (Page 19)

Section 3: Scale Installation
04/11 19 51255 Rev. 2
* * Warning * *
Module-to module bolts MUST be installed correctly and with proper torque
after all lifting, etc., is completed. Do NOT substitute or omit bolts.
B. Checking Adjustment (see Figures 51255-7 through 51255-10).
For undermount model:
a. Adjust end checking -- Adjust the end checking bolts so that they touch and
prevent movement. (See figure 51255-7)
b. Install the side checking brackets -- Bolt the brackets to the end checking
plates embedded in the end walls per certified prints. Set the bolts so that they
touch the block they bump against. (See figure 51255-8.)
Undermount end checking detail 51255-7
Undermount side checking detail 51255-8