Finish Thompson HVDP SERIES - Manual (Page 3)

3
INTRODUCTION
Finish Thompson is a designer and manufacturer of drum pumps and mixers available worldwide through a qualified,
experienced network of distributors and/or representatives. Drum pump selection is easy with FTI’s complete line of
interchangeable motors and tubes.
WARRANTY
Finish Thompson Inc (manufacturer) warrants this product to be free of defects in materials and workmanship for a period
of one year from date of purchase by original purchaser. If a warranted defect, which is determined by manufacturer’s
inspection, occurs within this period, it will be repaired or replaced at the manufacturer’s option, provided (1) the prod-
uct is submitted with proof of purchase date and (2) transportation charges are prepaid to the manufacturer. Liability
under this warranty is expressly limited to repairing or replacing the product or parts thereof and is in lieu of any other
warranties, either expressed or implied. This warranty does apply only to normal wear of the product or components.
This warranty does not apply to products or parts broken due to, in whole or in part, accident, overload, abuse, chemi-
cal attack, tampering, or alteration. The manufacturer accepts no responsibility for product damage or personal injuries
sustained when the product is modified in any way. If this warranty does not apply, the purchaser shall bear all cost for
labor, material and transportation.
Manufacturer shall not be liable for incidental or consequential damages including, but not limited to process down
time, transportation costs, costs associated with replacement or substitution products, labor costs, product installation
or removal costs, or loss of profit. In any and all events, manufacturer’s liability shall not exceed the purchase price of
the product and/or accessories.
The user must exercise primary responsibility in selecting the product’s materials of construction, which are compatible
with the fluid(s) that come(s) in contact with the product. The user may consult Finish Thompson Inc. (manufacturer)
and/or a manufacturer’s representative/distributor agent to seek a recommendation of the product’s material of construc-
tion that offers the optimum available chemical compatibility.
However neither Manufacturer nor agent shall be liable for product damage or failure, injuries, or any other damage or
loss arising out of a reaction, interaction or any chemical effect that occurs between the materials of the products con-
struction and fluids that come into contact with the product’s internals.
RETURN POLICY
Should you have any problems with this product, please contact the distributor in your area. The distributor will then
determine if a return to the factory is necessary and will contact the factory for a return authorization number.
CHEMICAL REACTION DISCLAIMER