Finish Thompson M5V 102972 & under User Manual

Page 5

Advertising
background image

SAFETY

1. Introduction

This manual contains all the information needed for the correct installation, use and maintenance of your new Finish
Thompson motor. It should be read and understood by all the personnel involved in installation, operating and servic-
ing of the pump before it is started.

2. Operator Qualification and Training

The personnel in charge of the installation, operation and maintenance of the pump unit we produce must be quali-
fied and able to perform the operations described in this manual. Finish Thompson Inc. shall not be held responsible
for the training level of personnel and for the fact that they are not fully aware of the contents of this manual.

3. Safety Instructions

FOR YOUR OWN SAFETY:

BEFORE UNDERTAKING ANY SERVICE OPERATION ON YOUR MOTOR OR PUMP, PLEASE MAKE SURE TO WEAR THE
PROPER PROTECTIVE GEAR.

GENERAL DANGER

NEVER use a plastic pump or an open, splash-proof, TEFC or non-ATEX motor when pumping or mixing flammable or
combustible material.

ALWAYS use and store the pump and motor in an upright position.

DANGER: POWER SUPPLY

NEVER perform any maintenance operation on the motor while it is running or before it has been disconnected from
the power supply. Avoid any possible hazard that might be caused by electric power.

ALWAYS check the electrical specifications on the motor data plate and make sure they correspond to the power
supply to which it will be connected.

ALWAYS place motor in the OFF position prior to connecting the power source.

NEVER immerse the motor in liquid.

4. Noise Level

MV Motors in normal operating conditions produce a sound level equal or less than 79 dBA at a distance of three feet
(~ one meter).

5. Modifications and Spare Parts

Any changes concerning the service of the motor as originally purchased, can be executed only after written approval
from Finish Thompson Inc. It is recommended to use only genuine Finish Thompson Inc. spare parts and approved
accessories. The use of non original spare parts or non approved accessories will void warranty and removes any
responsibility on our behalf for any damage caused to people or things.

3

Advertising
This manual is related to the following products: