The probe data display – Gentec-EO MACH 6 User Manual
Page 33
Advertising
Mach 6 User’s Manual Revision 2.1
33
Figure 7, FFT Display
The function of the controls and indicators are:
Remove DC Component
Removes the DC component from the FFT. This control must be set before reading the
data from the instrument or a saved data file.
Unwrap Phase
Unwrap Phase, when set to TRUE, enables phase unwrapping on the output phase
Amplitude Spectrum Phase.
The Probe Data Display
Figure 8 shows the Probe Data Display of the Applications Software.
Advertising