Recycling and separation procedure, 1 separation – Gentec-EO MACH 6 User Manual
Page 46
Advertising
Mach 6 User’s Manual Revision 2.1
46
Recycling and separation procedure.
This section is used by the recycling center when the monitor is at the end of its life.
Breaking the calibration seal or opening the monitor will void the Monitor warranty.
The complete Monitor contains
1 Monitor
1 USB cable
1 Instruction manual
1 Calibration certificate
1 Software cdrom
7.8.1 Separation:
Paper: Manual and certificate
Aluminum: Monitor enclosure.
Printed circuit board: inside the monitor.
7.8.2 Dismantling procedure:
To open the monitor:
Remove all the screws on both sides of the monitor:
Remove the PCB by sliding it out of the enclosure.
Advertising