Gentec-EO MACH 6 - Manual (Page 34)

Mach 6 User’s Manual Revision 2.1 34
Figure 8, Probe Data Display
The functions of the controls or indicators are:
Wavelength Correction Factor
The responsivity correction factor that corresponds to the wavelength response of the
sensor. Note that this is only active when wavelength is on and the set wavelength is
different than the calibration wavelength.
Calibration Wavelength
The wavelength of the laser used to calibrate the sensor.
Calibration Temperature
The temperature of the sensor at calibration.
Temperature Coefficient
The temperature coefficient of the sensor. This is used in the temperature correction
algorithm.
Responsivity
The responsivity of the sensor at the calibration wavelength and temperature.