Gentec-EO PC-MAESTRO (Old Software for MAESTRO) - Manual (Page 11)

PC- MAESTRO User’s Manual Revision 1.0 10
3.1 The Main Controls
Fig. 3-2 PC-MAESTRO Main Controls
At any time, to give more space to your signal values and less to the ribbon, you can minimize the ribbon
by right clicking on it and choosing
“Minimize the ribbon”.
Fig. 3-3 The PC-MAESTRO with and without the Main Controls ribbon
3.1.1 CONNECTION menu
3.1.1.1 Automatic Connect/Disconnect button
Fig. 3-4 CONNECTION menu
This button is used to automatically connect or disconnect a MAESTRO from a PC. There is no need to
make a port selection, the PC-MAESTRO will automatically find a connected MAESTRO or any available
ports on the PC and will connect to it.
Warning
If a USB Bluetooth adapter is present on a PC, it is possible that the
connection will take longer. Some USB Bluetooth adapters use the same
virtual port as the PC-MAESTRO, but the delay for verifying the
connection to the Bluetooth port is longer than the traditional serial port.