Gentec-EO PC-MAESTRO (Old Software for MAESTRO) - Manual (Page 14)

PC- MAESTRO User’s Manual Revision 1.0 13
3.1.2.2.2 Set your Acquisition parameters in Energy Mode
In Energy Mode, you can use the
“Set Acquisition” tab to choose the sample rate and duration of an
acquisition. The sample rate is defined to measure 1 pulse every X pulses (for example: 1 measurement
every 10 pulses). The total duration is also set in a specified number of pulses. The filename for data
logging, the file location and the option to add a timestamp to each value can also be set using this menu.
Fig. 3-7 Acquisition settings options in Energy mode
Warning
The number of pulses acquired is the number of pulses that the PC-
MAESTRO received via the USB port, NOT the number of pulses that the
MAESTRO monitor received directly from a detector head. The number of
pulses, received via the serial port is limited. For repetition rates higher
than 300 Hz, the MAESTRO will perform a subsampling. If you need to
make an acquisition using all the points measured by the MAESTRO,
please use the MAESTRO monitor and store the file on a USB key.