Gentec-EO PC-MAESTRO (Old Software for MAESTRO) - Manual (Page 19)

PC- MAESTRO User’s Manual Revision 1.0 18
5 GRAPHICAL DISPLAYS
The PC-MAESTRO offers six different graphical displays to view and analyze your signal. Every display
shows the real time value of the signal on top of the graphic, except the Real Time graph which displays
the real time value in large digits in the center of the panel.
Real Time: A real time display of the signal value shown in the center of the graph panel with the
corresponding bar graph below.
Scope: A real time display of the signal value presented in a scope mode.
Needle: A real time display of the signal value presented by a needle.
Averaging: A scope-like display which presents the minimum, maximum, and average values of
the last 50 values for a given period.
Histogram: A real time graph that displays the power or energy distribution of the last desired
number of samples in the desired number of bars. Ex: A distribution, in real time, of the last 1000
samples in 50 different bars.
Statistics: Shows different measured and calculated information about the signal for a specified
duration and sample rate.
For all displays, you can access the specific display options by clicking the Settings button on the top
right of the graph panel. This operation will open the corresponding options panel for the current display,
located on the right-hand side of the software.
Fig. 5-1 Graphical Display with Settings button