Ransburg Aerobell Copes 75850 - Manual (Page 10)

Aerobell Copes - Introduction
FEATURES
• Aerobell quick change turbine motor.
• Retaining nut for fast replacement of the rotary
atomizer assembly.
• Center mounting of rotary atomizer.
• Indirect (external) charge for use with grounded,
waterborne systems.
• Optional direct charge for use with isolated,
waterborne systems (electrodes removed).
• Optional direct charge for use with grounded,
solventborne systems (electrodes removed).
GENERAL DESCRIPTION
Aerobell Copes is a indirect (external) charging
electrostatic applicator for use with grounded
waterborne fluid systems. Indirect charging,
known as ion bombardment, is a proven method
of electrostatically charging waterborne material
without the need of isolating the fluid system.
High voltage is applied to the six probes (electrode)
assemblies located on the exterior of the bell assembly.
Paint is atomized by the ground-ed bell cup and the
electrostatic charge is applied to the atomized paint
particles during the transfer to a grounded work
piece via the electrostatic field generated from the
six probes.
INTRODUCTION
Turbine Speed: 10,000-50,000 rpm
60,000 rpm max.
intermittent
Turbine Type: Impulse
Weight: 14.2 lbs.
Length: 14 in.
Diameter: 7-7/8 in. @ Electrode
Center
Turbine Air: 45 psi max. 18 scfm
Bearing Air: 60 psi min. / 100 psi max.
2-3 scfm@80 psi
Shaping Air: 60 psi max.
Brake Air: 100 psi max.
Fluid Delivery: 400 cc/min. max.
Atomization Pattern: 15 in. - 48 in.
Rotary Atomizer
Change Time: Approx. 40 sec.
Bell Change Time: Approx. 40 sec.
Bell Cleaning Time: Approx. 2-3 sec.
(Solvent Flush)
Rotational Speed
Control Emitter
Type: Magnetic
Mechanical
SPECIFICATIONS
Power Supply Type: RansPak 1000
Charging Method: Indirect, Grounded Fluid
Output Voltage: Voltage Regulation Mode
Set Point (70 kV) max.
Output Current: Current Regulation Mode
Set Points (0-300) µA
Turbine Speed
Control: Eurocard Atomizer
Module
Shaping Air Control: Eurocard Analog Module
Electrical
6
LN-9230-00.1