Securitron M380BD_C_C2_X MAGNALOCK_Series - Manual (Page 14)

PN# 500-23310
Page 14 Rev. B 06/14
Adjustments:
1. Assemble Lock to the Bracket and Adjust:
Loosen the two screws securing the mounting bracket to the door frame so that the bracket can move.
Slide the lock onto the mounting bracket and test fit against the strike plate with the door closed. Slide the lock
so that the entire face makes contact with the strike plate.
Mark back edge of mounting bracket at each end and remove the lock from the bracket.
2.
Ensure that the mounting bracket aligns with the marks and tighten the mounting screws .
Quick Clip 7:
Adjustment