Securitron M380BD_C_C2_X MAGNALOCK_Series - Manual (Page 5)

PN# 500-23310
Page 5 Rev. B 06/14
Magnalock Preparation
1.
Using a Phillips screwdriver, remove the two (2) screws securing the cover as shown.
Remove the cover to provide access to the circuit board on the back of the magnet.
The screws should be saved to re-attach the cover later.
2.
Component Locations
SW1
Quick Clip 1:
BDCX
Configuration
SW3
J9
J8
JP3
JP1
JP4 J7
J2
J3
J12 J6