Securitron M380BD_C_C2_X MAGNALOCK_Series - Manual (Page 2)

PN# 500-23310
Page 2 Rev. B 06/14
Recommended Tools
M380BDCX Specifications
Mechanical Electrical Environmental (Recommended)
Physical Size:
Height: 2.20” [56mm]
Depth: 2.45” [62mm]
Length: 10.00” [254mm]
Shipped Weight:
Weight: 6.5 lbs
Holding Force (Maximum)
600 Lbs. [272kg]
UL Tested Ratings:
Static Holding Force: 500 lbs
[227 kg]
Dynamic Holding Force: 50 ft-
lbs [68 J]
Endurance: 250,000 cycles
Input Voltage
12/24 VDC
Current
Magnalock
12VDC/550mA (±10%)
24VDC/300mA (±10%)
Optional Camera
12VDC/200mA (±10%)
24VDC/80mA (±10%)
Optional PIR
12VDC/25mA (±10%)
24VDC/10mA (±10%)
Tamper Switch Rating
Voltage – 30VDC (Maximum)
Current – 1 Amp
DPS Rating (M380 only)
Voltage – 30VDC
(Maximum) Current – 125mA
BondSTAT Switch Rating
Voltage – 30VDC (Maximum)
Current – 1 Amp
Request to Exit Switch Rating
Voltage – 30VDC (Maximum)
Current – 1 Amp
Operating Temperature
32ºF to 110ºF [0ºC to 43ºC]
Humidity
10% to 90% RH
Camera Specifications
Color Version:
Horizontal Resolution: 520 TV Line
Video output: 1Vp-p, 75Ω
Min illumination: 1.5 LUX
Black and White Version:
Horizontal Resolution: 420 TV Line
Video output: 1Vp-p, 75Ω
Min illumination: 0.1 LUX
Magnalock Preparation and Installation
Pre-Installation Survey
Before installing the Magnalock, the mounting location should be determined and assessed for the
following:
 Physical strength of the frame should be strong enough to meet or exceed the holding force of
the Magnalock.
Frame and vicinity should offer protection for the wiring to prevent vandalism.
 Door should be inspected for any obstacles that may interfere when mounting the strike plate.
 The Magnalock M370/M380 comes with factory default mounting for use with an outswing door.
Please contact Securitron for available brackets for other installation configurations.
Masking Tape #1 and #2 Phillips Screwdrivers Hammer
Measuring Device 1/2” Open End or Crescent Wrench Pencil/Pen
Center Punch Wire Strippers/Cutter Multimeter
Fish Tape or Lead Wire 3/16” Hex (Allen) Wrench
Drill bits: 3/16”, 7/32” (wood frames only), 3/8”, 1/2”