SecurityMan iCamDVR (after Dec. 2011 shipment) - Manual (Page 18)

18 | SecurityMan
Record Status Panel
LED colors indicator and what they mean.
Normal State (Gray) 1.
Manual Record State (Teal) 2.
Schedule Record State (Green) 3.
Motion Detection Record State (Yellow) 4.
Video Loss State (Blue) 5.
NoTe
It is strongly recommended that the default user name and
password be change by the system administrator of iCamDVR.
Manual Record Mode
Manual Record Mode is the most common record mode
used. This is automatic recording mode where it sustains
the recording until stopped by user.
Schedule Record
Schedule record is used to setup time and days of the
week for recording. This mode can be found under the
“Schedule configuration” panel of Config. When sched-
ule record is active, the green light LED in the Record
Status Panel will light green to show the corresponding
channel is in Schedule Record mode. If the schedule record
mode changes to manual record, the green light LED
will change to Teal LED.
Please refer to “0 Schedule configuration” for in depth
details.
NoTICe
Higher frame rate can be selected for better picture quality
but requires larger drive space while lower frame rate acquired
less hard drive space but reduces picture quality.
figure 22 - Main Display Interface
figure 23 - Record Status Panel and alarm output Status Panel