SecurityMan iCamDVR (after Dec. 2011 shipment) - Manual (Page 89)

89 | SecurityMan
TRoUBLeSHooTING
System requirements for iCamDVR & Remote Client Computers:
P III 800 MHz Processor •
256MB RAM •
Windows 2000 (SP4), Windows XP (SP1), Windows Vista, Windows 7 (32-bit/64-bit OS) •
NVIDIA Video Card with 32MB and above •
DirectX 9.0 or above •
80 GB of free disk space •
Installation Instruction:
1) Connect the iCamDVR hardware via USB to the computer (do not connect the camera), boot up the computer
into windows.
2) Windows will come up with Hardware Wizard, click CANCEL.
3) Put the installation CD into the CD-ROM tray and SuperDVR installation auto run will start, select “Run Autorun.
exe” and then “Install DVR” to start the installation process.
4) Follow the installation steps on through; a message saying this program has not passed windows logo testing,
click on “Continued anyway” to precede installation, see manual above for detail.
5) Reboot computer.
6) After computer restart, double click on “SuperDVR” shortcut on the desktop to execute SuperDVR and auto scan
for iCamDVR hardware. If iCamDVR hardware is not found SuperDVR will not run.
7) Login to the program.
8) Connect all cameras.