SecurityMan iCamDVR (after Dec. 2011 shipment) - Manual (Page 56)

56 | SecurityMan
on oK to remote login:
After logging in successfully, CAM1 or channel #1 video
will stream from SuperDVR server as illustrated below in
figure 86.
Remote WebCam Live Surveillance is use for live moni-
toring purposes and PTZ controls of protocol camera(s).
To toggle between single camera and four camera view,
click on the Screen 1 and Screen 4 accordingly. In single
channel view double-click on the camera icons in the up-
per right of the window to advance to the next camera in
ascending order (see illustration below). Press Screen 4 at
NoTICe
The default User Name is SYSTEM and the default password is
blank (w/o password). The default Data Port is 1160, Command
Port is 1159. Web based remote access supports multi user
access, up to 6 users can remote access simultaneously.
anytime to get back to four split screen display.
To adjust the image quality, select or highlight a camera
and then move the scroll bars accordingly to adjust the
camera’s contrast, brightness, hue, and saturation.
To control the PTZ (pan/tilt/zoom) of a protocol camera,
make sure the protocol camera is installed and connected
to the iCamDVR. Highlight the PTZ camera channel and
the PTZ controls will become active. For Pan/Tilt/Zoom
controls, i.e. Preset, Speed, and Configuration please refer
to page 41 for detail. Click on the at anytime to
logout.
figure 86 -Remote WebCam Live Surveillance
figure 85 - Login WebCam