Pan/tilt/zoom control – SecurityMan iCamDVR (after Dec. 2011 shipment) User Manual

Page 41

Advertising
background image

41 | SecurityMan

PaN/TILT/ZooM CoNTRoL

Click on the icon button from the main SuperDVR
interface display to enter the Pan/Tilt/Zoom Control win-
dows of protocol camera as illustrated below in figure 56.

The PTZ Control Panel allows full control of the Pan/Tilt/
Zoom camera which includes 16 camera preset positions
and 4 groups of preset position by ways of auto dwelling
between the preset positions. Plus the ability to do manu-
al Pan, Tilt, Zoom, Focus, and Iris controls as needed. Let’s
take a look at the PTZ control panel below in figure 57 in
more detail.

The middle and bottom section of the PTZ control panel
above is manual immediate Pan, Tilt, Stop, Focus, Zoom,
and Iris controls of the PTZ camera. Bottom control
knobs are used to control the Left, Right, Up, and Down
movements of the PTZ camera. Press the center STOP
button whenever the group preset is active to stop
the group from auto dwelling. On top of the bottom
control knobs of the PTZ control panel are manual
Focus in/out, Zoom in/out, and Iris in/out buttons. Click
on the and accordingly to adjust Iris, Focus
and Zoom corresponding values.

figure 56 - P.T.Z control interface

figure 57 - P.T.Z Control function buttons panel

Advertising