SecurityMan iCamDVR (after Dec. 2011 shipment) - Manual (Page 66)

66 | SecurityMan
Image Playback
To playback the snapshot images from the phone, select
Image from the main user interface and the Image window
interface will appear as shown below. Tap or to
move to the first or the last image, or to go to
previous image or next image, to delete the image,
and to copy the image to the phone’s album.
in Group Dwell Preset mode). Tap on or respectively
to Zoom/Focus/Iris in or out. To move the Speed bar,
hold down and drag the bar to decrease or increase the
rotational speed of the PTZ camera. Check H-Reserve or
V-Reserve respectively to allow left/right or up/down
(horizontal/vertical) reserved for the PTZ camera. Preset
position and Group dwell preset position can be access by
tapping on the white circle located at the bottom center of
the interface to toggle between the pages as circled in the
image below.
Previous Next
NoTe
A PTZ supported protocol camera is required to be setup and
configured with the local iCamDVR for this function to operate.