SecurityMan iCamDVR (after Dec. 2011 shipment) - Manual (Page 26)

26 | SecurityMan
audio In
Audio input can be setup to record audio and are select-
able between audio1, audio2 or none (no audio recording
or no microphone connection). The iCamDVR provides two
audio hardware channels but only one audio channel can
be selected to be active for recording. Please select the
audio channel that is the closest to a desire camera loca-
tion for recording. Since only one audio channel can be
active please be sure to setup the other 3 camera to none.
Schedule configuration Panel
Click on the tab to enter Schedule Configuration
panel as shown below (Figure 32):
The Schedule Configuration panel contains Schedule
Record, Motion Detection and alarm output setup for
SuperDVR. Schedule Record can be use to setup recording
based on scheduling the days of the week and any time of
the days to record.
NoTICe
One or more record mode can be actively setup, avoid du-
plicate or redundancy date/time setting under each record
mode.
To setup schedule time recording, select any of the inde-
pendent CaM1 through CAM4 (STEP 1), click on any color
days of the week to highlight selection (STEP 2), and then
click on “add or edit” to edit/modify the days of the week
and the time of the days (STEP 3), shown Figure33 below.
figure 32 - Schedule Configuration
figure 33 - Setup Schedule Recording