Gilderfluke&Co Frequency Shift Keyed/Remote Terminal Unit - Manual (Page 28)

EJECT 4 2A 8A 83
Opens the disk compartment. Returns 8A immediately, 83 when task is completed.
EJECT ENABLE 2 74 8A
Enables the ‘Eject’ button on the front of the LaserDisk player.
EJECT DISABLE 2 75 8A
Disables the ‘Eject’ button on the front of the LaserDisk player.
F-PLAY 3A 8A
Puts the player in normal play mode.
F-STEP and STILL 2 2B 8A
Steps the LaserDisk forward by one frame and display still frame.
R-STEP and STILL 2 2C 8A
Steps the LaserDisk backwards by one frame and display still frame.
FRAME # MODE 55 8A
Sets the player to ‘frame’ mode.
MOTOR ON 62 8A 8A
Turns the motor on if it is stopped. Returns the first 8A immediately, and the second after
the motor is up to speed. Returns one NAK if the motor was already on.
MOTOR OFF 63 8A 8A
Turns the motor off if it is running. Returns the first 8A immediately, and the second after
the motor has wound down. Returns one NAK if the motor was already off.
NAK 8B
Code returned when the player doesn’t like the command, as in the above two examples.
STILL 4F 8A
Sets the player to display a frozen picture.
STOP 3F 8A
Stops all video and audio output.
VIDEO OFF 2 26 8A
Turns off video output.
VIDEO ON 2 27 8A
Turns on video output.
G ILDERFLUKE & C O . • 205 S OUTH F LOWER S T . • B URBANK , C ALIF . 91502-2102 • 818/840-9484 • FAX 818/840-9485
24 of 25
4 Command not available on all Sony models