4 foot brackets 1 (model no.: ft), 6 low power consumption type (model no.: la), 7 guide oriented direction (model no.: gs2 to gs4) – IAI America RCP2-SRGD4R User Manual
Page 31
1. Specifications Check
25
1.3.4 Foot brackets 1 (Model No.: FT)
It is a metal part to be attached on the bottom of the actuator to affix with screws from top side.
1.3.5 Foot brackets 2 (Model No.: FT2 (Attachment to the Right Side), FT2
(Attachment to the Left Side))
This is a foot bracket to fix the actuator unit from with screws.
1.3.6 Low Power Consumption Type (Model No.: LA)
RCA enables to drop the maximum load current of the standard type as shown in the table below.
For more details, refer to the power capacity of ACON/ASEL controllers.
Standard Type
Low Power Consumption Type
Peak Load Electric Current
4.0A
2.2A
1.3.7 Guide Oriented Direction (Model No.: GS2 to GS4)
The rod position of the single guide type is either on right (GS2), bottom (GS3) or left (GS4).
It will be attached on the top when there is no indication (Standard).
st+10
4-
φ
6.6
through
71 57
20
105
95
10
RCP2 / RCA-SRA4R
Model code of single product
RCP2-FT-SRA4