IAI America PCON-CF User Manual
Pcon-c/cg/cf controller positioner type
Advertising
Table of contents
Document Outline
- Please Read Before Use
- CAUTION
- CE Marking
- Table of Contents
- Safety Guide
- 1. Overview
- 2. Specifications
- 3. Installation and Noise Elimination
- 4. Wiring
- 5. I/O Signal Control and Signal Functions
- 6. Data Entry <Basics>
- 7. Operation <Practical Steps>
- 7.1 How to Start
- 7.2 Home Return Operation
- 7.3 Positioning Mode (Back and Forth Movement between Two Points)
- 7.4 Push & Hold Mode
- 7.5 Speed Change during Movement
- 7.6 Operation at Different Acceleration and Deceleration Settings
- 7.7 Pause
- 7.8 Zone Signal Output
- 7.9 Incremental Moves
- 7.10 Jogging/Teaching Using PIO
- 7.11 Operation in 7-point Type
- 7.12 Operation in 3-point Type
- 8. Parameter Settings
- 9. PC/Teaching Pendant Connection Method in Multi-axis Configurations
- 10. Troubleshooting
- * Appendix
- List of Specifications of Connectable Actuators
- Correlation diagram of speed and loading capacity for the slider type (motor-straight type)
- Correlation diagram of speed and loading capacity for the slider type (motor-reversing type)
- Correlation diagram of speed and loading capacity for the standard rod type
- Correlation diagram of speed and loading capacity for the single-guide type
- Correlation diagram of speed and loading capacity for the double-guide type
- Correlation diagram of speed and loading capacity for the dustproof/splash-proof type
- Correlation diagram of speed and load capacity for the high-thrust type
- Correlation diagram of speed and loading capacity for the RCP3 slider type
- Correlation diagram of speed and loading capacity for the RCP3 table type
- Push Force and Current-limiting Value
- Fault check and replacement of the cooling fan
- Example of Basic PCON Positioning Sequence
- Recording of Parameters
- Change History