IDEC MicroSmart AS-i - Manual (Page 11)

2: M ODULE S PECIFICATIONS
2-2 M ICRO S MART AS-I NTERFACE M ASTER M ODULE U SER ’ S M ANUAL
Parts Description
(1) LED Indicators Status LEDs: Indicate the AS-Interface bus status.
I/O LEDs: Indicate the I/O status of the slave specified by the address LEDs.
Address LEDs: Indicate slave addresses.
(2) Pushbuttons Used to select slave addresses, change modes, and store configuration.
(3) AS-Interface Cable Terminal Block
Connects the AS-Interface cable.
One terminal block is supplied with the AS-Interface master module.
When ordering separately, specify Type No. FC4A-PMT3P and quantity
(package quantity: 2).
(4) AS-Interface Cable Connector
Installs the AS-Interface cable terminal block.
(5) Unlatch Button Used to unlatch the AS-Interface master module from the CPU or I/O module.
(6) Expansion Connector Connects to the CPU and other I/O modules.
(Applicable CPU modules are 20-I/O relay output and 40-I/O slim types.)
(7) Module Label Indicates the AS-Interface master module Type No. and specifications.
(6) Expansion Connector
(7) Module Label
(1) LED Indicators
(4) AS-Inter face Cable Connector
(2) Pushbuttons
PB1
PB2
(5) Unlatch Button
(5) Unlatch Button
(3) AS-Inter face Cable Terminal Block
(supplied with the AS-Inter face master module)