IDEC MicroSmart AS-i - Manual (Page 20)

M ICRO S MART AS-I NTERFACE M ASTER M ODULE U SER ’ S M ANUAL 4-1
4: O
PERATION
B
ASICS
Introduction
This chapter describes general information about simple operating procedures for the basic AS-Interface system from pro-
gramming
WindLDR on a computer to monitoring the slave operation.
AS-Interface System Setup
The sample AS-Interface system consists of the following devices:
Connect the devices as shown below.
Name Type No. Description
MicroSmart Slim Type CPU Module FC4A-D20RK1 System program version 201 or later
MicroSmart AS-Interface Master Module FC4A-AS62M —
WindLDR FC9Y-LP2CDW Version 4.21 or higher
AS-Interface Standard Slave —
1 unit
Address 0
ID: 0, I/O: 7, ID2: F, ID1: 7
AS-Interface Power Supply PS2R-Q30ABL Output 30.5V DC, 2.4A (73W)
Slim Type CPU Module
FC4A-D20RK1
AS-Inter face Master Module
FC4A-AS62M
Standard
AS-Inter face Cable
Computer Link Cable 4C
FC2A-KC4C
3m (9.84 ft.) long
AS-Interface Power Supply
Standard Slave
Address 0
ID: 0, I/O: 7, ID2: F, ID1: 7