LevelOne FGP-2472 - Manual (Page 138)

132
Function description:
Alarm configuration is used to configure the persons who should receive the
alarm message via either email, or both. It depends on your settings. An email
address or a mobile phone number has to be set in the web page of alarm
configuration (See Fig. 3-51). Then, user can read the trap information from
the email or the mobile phone. This function provides 6 email addresses and 6
mobile phone numbers at most. The 22 different trap events will be sent out to
SNMP Manager when trap event occurs. After ticking trap events, you can fill
in your desired email addresses and mobile phone numbers. Then, please
click <Apply> button to complete the alarm configuration. It will take effect in a
few seconds.
Fig. 3-51
Parameter description:
Email:
Mail Server: the IP address of the server transferring your email.
Username: your username on the mail server.
Password: your password on the mail server.
Sender: To set the mail sender name
Return-Path: To set the mail return-path as sender mail address.
Email Address 1 – 6: email address that would like to receive the
alarm message.